Light Duty Suspension Products June 2015

Comments

Table Remarks Key Chart

Helper Spring Comments

A1 A2 A3 A4 A5 A6 A7 H1 H2 H3 H4 H5 H6 H7

8" Clearance required between tire and frame. 6" Clearance required between tire and frame. Universal weld on kit. Use P/N 57201 for vehicles with 8"-10" spacing between axle and frame. Use P/N 57220 for vehicles with 6 ½"-8" spacing between axle and frame. Without OEM Quad Shocks. Must remove front anti-sway bar. Some models must alter skit plate. 59103 requires 6" clearance between tire and frame. 59012 requires 8 ½" clearance between bottom of frame rail and top of leaf spring, if less use P/N 59104. Cannot be shipped UPS. Only fits vehicles without OEM rear helper. Heavy duty available. Use 510-135 to replace OEM single leaf helper. With 454 engine use 502-340 U-bolt kit. For trucks that require longer U-bolts, use the optional 534-169 End Link Kit. 502-344 U-bolts included in master kit. Depending on which OEM spacer block is used, other lengths may be required. Consult heavy duty U-bolt chart on page 55. The gross axle weight rating (GAWR) for the front axle is listed on the vehicle certification label on the left door near the door latch. Replaces OEM single leaf helper. With OEM sway bar use 502-298 U-bolt kit. Relocation of tail pipe may be required. Will raise vehicle approximately 1".

Comments

H8

H9 H11 H12 H13 H14 H15 H18

Installation kit contains 3 clamp-on and 1 bolt-on adjustable brackets. Installation kit contains 2 clamp-on and 2 bolt-on adjustable brackets. With diesel or 454 engine use 502-256 U-bolt kit.

TBA

To be announced.

2